Operational IC

AD620 Features & Specifications:Power Supply Range: ±2.3 V to ±18 VMax Supply Current: 1.3 mAInput Offset Voltage: 50 μVBandwidth:120 kHzInput Offset Drift: 0.6 μV/°CInput Bias Current: 1.0 nA maxAvailable in 8-Pin PDIPPackage:1x AD620 Instrumentation Amplifier..

Specifications:Supply Voltage: 4V to 36 VOutput Current per Channel: 40 mAGBP - Gain Bandwidth Product: 4.5 MHzSR - Slew Rate: 9 V/usCMRR - Common Mode Rejection Ratio: 70 dBOperating Supply Current: 4 mAVoltage Gain dB: 100 dBVery High Input Impedance (ZIN) -1.5TΩVery Low Input Current (Il) -10pA a..

Quad Bilateral Switch for MultiplexingOperating Voltage: 3V to 18VSwitching Voltage: 20V (maximum)On-state Resistance: 200Ω (at 15V Vcc and 10kΩ Load)Output current High: -0.4mALow Level Control pin Voltage: 0.9V (max)High Level Control pin Voltage: 11V (min @ 15V Vcc)Available in 14-pin PDIP, GDIP,..

CD4046B CMOS Micropower Phase-Locked Loop (PLL) consists of a low-power, linear voltage-controlled oscillator (VCO) and two different phase comparators having a common signal-input amplifier and a common comparator input. A 5.2-V zener diode is provided for supply regulation if necessary.The CD4046B..

UA741 General-purpose single operationa l amplifier N DIP8 (plastic package) D SO8 (plastic micropackage) Pin connect ions (top view) 1 - Offset null 1 2 - I nverting input 3 - Non-inverting input 4 - VCC5 - Offset null 2 6 - Output 7 - VCC+ 8 - N.C.Datasheet - production data Features • Large ..

The HA17741/PS is an internal phase compensation high-performance operational amplifier, that is appropriate for use in a wide range of applications in the test and control fields.High voltage gain : 106 dB (Typ)Power Dissipation:100mW(Maximum),65mW(Typical)Power Supply Voltage:+18VInput Voltag..

ICL-7660 CMOS Voltage Converter.DescriptionSimple Conversion of +5V to ±5V SuppliesSimple Voltage MultiplicationTypical Open Circuit Conversion Efficiency 99.9%Wide Supply Range 1.5V to 10VMinimal External Components Required..

TL-081 Wide Bandwidth JFET Op-Amp.FeaturesLow Power Op-Amp with High Slew Rates, Low Input Bias and Offset CurrentsInput Offset Voltage: 3 mVInput Offset Current: 5 pAInput Bias Current: 30 pACommon Mode Rejection: 86 dBSupply Current: 1.4 mA / AmplifierSupply Voltage: ±3V to ±15VTL081CP Datasheet..

Specifications:Power Supply Voltage VCC:  ±18 V Input Differential Voltage VI(DIFF):  30 V Input Voltage:  VI ±15 V Operating Temperature Range KA1458 TOPR:  0 ~ + 70 °C Storage Temperature Range TSTG:  - 65 ~ + 150 °CPackage:1x KA1458 Dual Operational Amplifier..

Description: The LM358 is a great, easy-to-use dual-channel opamp. Opamps have so many applications we figured we should probably carry at least one in a DIP package. LM358 applications include transducer amplifiers, DC gain blocks and all the conventional opamp circuits.If you’re loo..

MCP602 Dual Op-AmpFeatures:Single-Supply: 2.7V to 5.5VRail-to-Rail OutputInput Range Includes GroundGain Bandwidth Product: 2.8 MHz (typ.)Unity-Gain StableLow Quiescent Current: 230 µA/amplifier (typ.)Chip Select (CS): MCP603 onlyTemperature Ranges: – Industrial: -40°C to +85°C – Extended: -40°C to ..

The PLL IC 556 is usable over the frequency range 0.1 Hz to 500 kHz. It has highly stable centre frequency and is able to achieve a very linear FM detection. The output of VCO is capable of producing TTL compatible square wave. The dual supply is in the range of ±6V to ±12V. The IC can also be opera..

The TL071 JFET-input Operational Amplifier incorporates well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit. The low harmonic distortion and low noise make the TL071 ideally suited for high-fidelity and audio pre-amplifier applications. ..

DESCRIPTIONThe TL072, TL072A, and TL072B are high speed JFET input dual operational amplifiers incorporating well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit. The devices feature high slew rates, low input bias and offset current, and low offset voltage temp..

The TL08x JFET-input operational amplifier family is designed to offer a wider selection than any previously developed operational amplifier family. Each of these JFET-input operational amplifiers incorporates well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit..

TLC-274 Quad Single Supply Op-Amp.Description: Single Supply OperationWide Range of Supply VoltagesOutput Voltage Range includes Negative RailHigh Input ImpedanceBuilt-In ESD ProtectionDesigned-In Latch-Up ImmunityTLC274CN Datasheet..