Menu
Your Cart

Cooling Fan Blower DC Turbo Ball Bearing 3D Printer Accessories Wire 5V

Cooling Fan Blower DC Turbo Ball Bearing 3D Printer Accessories Wire 5V
Cooling Fan Blower DC Turbo Ball Bearing 3D Printer Accessories Wire 5V
Cooling Fan Blower DC Turbo Ball Bearing 3D Printer Accessories Wire 5V
2 - 3 Days
Cooling Fan Blower DC Turbo Ball Bearing 3D Printer Accessories Wire 5V
Cooling Fan Blower DC Turbo Ball Bearing 3D Printer Accessories Wire 5V
Cooling Fan Blower DC Turbo Ball Bearing 3D Printer Accessories Wire 5V

Characteristics:

Made of special and premium materials, it is resistant to high temperatures and extremely durable.

Guaranteed to run continuously for 30,000 hours at 40 °. Speed: 6800 ± 10%

Used in humidifier, aromatherapy and other series of small appliances; Small heat radiant communication equipment; Military equipment; Intelligent industrial control equipment Heat cooling plate, high-precision medical equipment; PC CPU server cooling dissipation and so on.

Bearing fan only, other accessories demo in the picture are not included!

 

Tips:

1. Do not touch the blade and the power cord around the fan or pull the power cord. The spindle and power cord will be damaged.

2. Prevent dust, water droplets and small insects from entering, which will affect life and defective products;

3. Do not use in flammable gases or harmful environments;

4. Use it within six months. Long-term storage will affect the performance of the fan due to the storage environment;

5. When the fan is running, do not try to block the fan for a long time. This will cause the fan to burn out due to continuous shutdown and not heat.

6. When installing the fan, pay special attention to noise caused by resonance or vibration;

7. When the fan falls from a height of 60cm during handling or operation, it will have some influence on the balance of the blade, especially the ball bearing to avoid falling;

8. The locking screw case torque must not exceed 4Kgf; Do not use a screwdriver, an iron rod, etc. to block the fan, This will damage the fan;

9. Be aware that the fan will hurt your fingers when running at high speed.

 

Specification:

Connector: Terminal Connector 2.45

Dimensions: 40x40x1 0mm / 1.57x1.57x0.40in

Cable length: 30cm (1.18 inch)

Voltage: 5V

Rated current: 0.06A + 5%

Type: sleeve bearing

Quantity: 1 Pc

Write a review

Note: HTML is not translated!
Bad Good
Captcha