Menu
Your Cart

PLA / PLA+ Plus 3D Printer Filament 1.75mm 1KG/2.2lb

PLA / PLA+ Plus 3D Printer Filament 1.75mm 1KG/2.2lb
PLA / PLA+ Plus 3D Printer Filament 1.75mm 1KG/2.2lb
PLA / PLA+ Plus 3D Printer Filament 1.75mm 1KG/2.2lb
Hot
PLA / PLA+ Plus 3D Printer Filament 1.75mm 1KG/2.2lb
PLA / PLA+ Plus 3D Printer Filament 1.75mm 1KG/2.2lb
PLA / PLA+ Plus 3D Printer Filament 1.75mm 1KG/2.2lb

These 1.75mm PLA filaments are made of premium PLA material (Polylactic Acid), which boasts complete biodegradation and lower melting temperature, even does not need a heated bed, with no odor during the printing.

FAQs:

Why can't the filaments stick to the build bed?

1. Check the temperature setting before printing, PLA filaments have lower extrusion temperature;

2. Check if the plate surface has been used for a long time, it is recommended to replace it with our new one to ensure an strong first layer adhesion;

3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;


Temperature

Recommended Extrusion/Nozzle Temp: 190°C - 220°C (374℉~ 428℉),

Heated Bed Temp: 25°C - 60°C (77℉~ 140℉)

Filaments Diameter and Accuracy: 1.75 mm +/- 0.02mm

Filaments Net Weight: 1 kg (2.2 lbs)


Packaging Included:

1 × spool of PLA filaments


Write a review

Note: HTML is not translated!
Bad Good
Captcha