Robotics & Mechanisms

Features: Arduino Hexapod Robot has a more natural looking, more articulate leg and body design. The 18DOF (degree of freedom) leg design means this robot can walk in any direction. This is quite possibly the nicest looking, best performing, commercially available hexapod out there. M..

Aluminum multifunction steering support X 1Long aluminum U-shaped support X 1Imports with glassSmall round rudder X 2Screw: 3 * 10 1 sets , 4 * 8 4 sets , 3 * 6 2 sets - M2 self-tapping screws 8..

Product Name: DC Motor Hex CouplerMateria: CopperColor: Gold ToneTotal Size: 30 x 12mm/ 1.2" x 0.47"(L*Max.W)Hex Hole Diameter: 4mm / 0.12"Screw Fixed Hole Diameter: 2.5mm/ 0.1"..

Specifications:Material: Aluminum alloyLoad capacity:1100NSpeed: 12mm/sInput Voltage: 12V DCStroke Length: 50mm/2 inch;Duty cycle: 10% Technical Parameters:- Rated power: 20W, maximum 30W.- Push bar Each side contains a travel limit switch. When the telescopic bar runs to the top or to the top,..

Description:The clamping screw aperture: 5mmThe edge to edge size: 12mmThe total length: 18mmDC geared motor to robot smart car wheels Hex coupler.Package: 1x Coupler2x screws..

Specifications:Type: L type Servo BracketMaterial: 2mm Hard aluminum plateSurface treatment: Sandblasting OxidationSize: 35X30mm/1.38x1.18inchWeight: 10gColor: BlackPackage:1x Black Metal L-Shaped Beam Bracket for Robot Arm/Servo/Robot Humanoid..

Specifications:Material: Aluminum alloyColor: SilverInput Voltage: DC 12VMax Push Load: 900NStroke length: 300MMSpeed: 10MM/sOperating frequency: 20%Extended Length: 28 1/8" inchesCompressed Length: 16 1/8" inchesDiameter of mounting holes: 6mm/0.24"Width: 74mm/2.91"Features:Wiring included, pre-ins..

250mm/10inch Stroke Heavy duty DC 12V 500N/50kg Load Linear Actuator multi-function 10"Item Details:Speed:                  10mm/SVoltage(V):           12v DCCommutation:     BrushUsage:      &nb..

DESCRIPTIONThese Linear Actuators are designed for most metal and the entire casing is sealed to provide protection against dust and water vapor: the manufacturer provides a degree of protection IP54.They use a worm drive to move a shaft back and forth along its length. The worm drive ensures that t..

Features:The Kit comes with hardware, unassemblyClamp Max open is 55mmClamp total length:108mmClamp total width:98mm ( when the Clamp open the maximum overall width)Working voltage: 4.8-6V (when the Clamp open)The plank kit is very light..

Specifications:Material: AluminumColor: silverTooth: 25Screws: M3Weight (gm): 2Diameter (mm): 20Shipment Weight: 0.005 kgShipment Dimensions: 3 × 3 × 2 cmPackage:1x Metal Servo Horn..

SPECIFICATIONS:Material: 2mm Hard aluminumSurfacing: Sandblasting oxidationWeight: 50gColor: BlackPACKAGE:1 x U Shape Robot Servo Bracket..

This Line Following and Obstacle Avoiding Robot is a Robot (usually a vehicle) which have both the characteristics of the Line Following Robot and the Obstacle Avoiding Robot i.e., it follows a colored path (usually a black line) and avoids any obstacle on the way.In this robot we use:1. Arduin..

Features:Clamp Max open is 55mmClamp total length:108mmClamp total width:98mm ( when the Clamp open the maximum overall width)Working voltage: 4.8-6V (when the Clamp open)The plank kit is very lightCompatible with HS322, HS422, MG995, SG5010 servoPackage included:- 1 x Aluminum Multi-Purpose Se..

Solenoids are basically electromagnets: they are made of a big coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the center of the coil. This makes the solenoid able to pull (from one end) or push (from the other). This sol..

12V Solenoid Lock12V Solenoid lock are basically electromagnets: they are made of a big coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the center of the coil. This makes the solenoid able to pull from one end.This solenoid lo..