Voltage Converters

Specifications:Product Name: 1000W TRANSFORMER 220V TO 110V VOLTAGE CONVERTER TRANSFORMERInput voltage: 100V - 250V 50/60 Hz ACOutput Voltage: 100-110V 50/60 Hz ACOutput Socket: 3 pinPackage:1x 1000W TRANSFORMER 220V TO 110V VOLTAGE CONVERTER TRANSFORMER..

Input voltage: 8-60V Input Current: 20A Quiescent current: 15mA (12V liter 20V, the output voltage, the higher the current will increase too quiet) Output voltage: 12-80V continuously adjustable Output Current: 20A MAX Over 15A, please enhance heat dissipation (input, output pressure related,..

Module properties: non-isolated step-up module (BOOST)Input voltage: DC 10V~60V (10~30V input voltage, maximum current 30A; 31~60V input voltage, maximum current 25A)Quiescent current: 15mA (12V step up to 20V, the higher output voltage the quiescent current will increase)Output voltage: 12~90V cont..

SPECIFICATIONS:Resistance materials: metal and plasticInput voltage: AC 220VVoltage regulation: AC 50-220VMaximum power: 2000 WWeight:41 gPackage weight:51 gPackage:1x  2000W AC 220V SCR Electronic Voltage Regulator Module..

Specification:Material: metal, plasticColor: black and blackSize: 19 x 20 x 18 mm (L x W x H)Input voltage: DC3.6V-6VInput Current: 1.5AOutput voltage: DC20KV (Please be sure to use safety when used)Output current: 0.05AInputLine Length: approx. 110 mm (red is positive)Output cable length: approx. 1..

Specifications:Input Voltage: 6V to 40V DC(10V to 40V is suggested)Output Voltage: 1.2V to 36V DCOutput Current: 20A(max.), 15A(suggested)Efficiency: 95%(24V to 12V, 20A)Output Ripple: ≤50mVWiring Method: TerminalShort Circuit Protection: Self-recovery(cannot short circuit for long time)Size: 60 x 5..

Description:Working voltage: AC 220VRegulation voltage: AC 10-220Vpower: 4000W (resistive load)Efficiency: 90%Dimensions: 85 x 55 x 38MMNote: You must connect to the load before the regulator.SCR is mainly used for resistive loads (incandescent electric wire, etc.), most of the single-phase AC motor..

Input voltage: 5.5-30VOutput voltage: 0.5-30VOutput current: long-term stable work in 3A, strengthen the heat can reach 4AOutput power: 35W natural cooling, heat dissipation to enhance 50WVoltage display resolution: 0.05VCurrent display resolution: 0.005AConversion efficiency: about 88%Soft-start: Y..

Specifications:Input voltage: AC 220V--240VOutput voltage: DC ±70V (3 Wire output)Output power: 800WConversion efficiency: Max 95%Use of the environment: -10 degrees --- 40 degreesStorage temperature: -30 degrees --- 85 degreesPackage:1x 500W amplifier power switch dual DC 80v 24v 36v 48v 60v..

Specifications:Input voltage: DC 7- 24VOutput voltage: DC 5VOutput current: 3A (max)Conversion efficiency: 96% (MAX)Switching frequency: 340KHzOutput ripple: 30mV (max)Load regulation: ± 0.5%Voltage regulation: ± 2.5%Operating Temperature: -40 °to +85 °Size: 6.2 x 2.1 x 1 cmNet weight:14 gColor: As ..

5-16V voltage input, 1.25V 1.5V 1.8V 2.5V 3.3V 5V output, 3A current output, short circuit point to adjust the output voltage (to avoid the phenomenon that the same type of potentiometer can be adjusted on the market), the default output voltage is 1.25V. Suitable for the replacement of various LCD ..

Specifications:Size: 51*26.3*14(L*W*H) (mm)Operating Temperature: -40 to +85°Voltage regulation: ± 2.5%Load regulation: ± 0.5%Output ripple: 50mV (max) 20m bandwidthSwitching frequency: 300 kHzConversion efficiency: 95% (highest)Output current: adjustable maximum 5AOutput voltage: 0.8V-30VInput volt..

Feature:Material: Electrical componentsColor: See picturesOperating voltage: 3.7-5V DCSize: 40 * 20mmPower: 3 WPackage:1x CT14 Micro 4.2 Stereo Bluetooth Power Amplifier Board Module..

Specifications:Module name :400W boost constant current moduleModule properties: non-isolated step-up module (BOOST)Input voltage: DC8.5V-50VInput current: 15A (MAX) exceeds 8A please enhance heat dissipationQuiescent current: 10mA (12V liter 20V, the output voltage, the higher the current will incr..

Description:When the car starts the voltage will be pulled down to below 7V or less, the engine at high speed when the voltage up to 15V or higher. This auto-buck-boost module solves this problem for devices operating at 12V, and the output can be stabilized at 12V regardless of the input voltage be..

Model/The name of the：XL6009 DC - DCThe booster moduleThe input voltage：(minimum 5 v to 3 v normal) ~ 35 vThe output voltage：6 v ~ 45 vThe output current：4 a(Max)Conversion efficiency：92%(highest)The output ripple：< 30 mvSwitching frequency：65 KHZWorking temperature：- 45°~ + 85°..

Descriptions: DC DC Step Down LM2596 Buck Converter 4.5-40V To 3-35V 3A Adjustable Module Power SupplyThis module features the adjustable LM2596 step-down (buck) switching regulator, capable of driving a 3A load with excellent line and load regulation. This is an LM2596 DC-DC buck converter ste..

Input: DC 6V-12V (The input voltage must be higher than the output voltage to 1V or more.)Triple output: 3.3V (+/-0.05v error), 5.0V (+/-0.05v error), 800mA (load current can not exceed 800mA), 12V (12V input directly to the exit)Three pairs of panel design, layout and good quality;Specially designe..

Specifications:Module Property: Non-isolated booster moduleInput Voltage: 12-32VOutput Voltage: 12-35V (adjustable)Output Current: 6A (MAX)Input Current: 10A (MAX) (Please enhance heat dissipation if more than 10A)Output Power: Natural cooling 100W (MAX), enhance heat dissipation 150W (MAX)Conversio..

1.When you use the product, the module inputs and outputs to be isolated from ground.2.USB output voltage is consistent with the module, not a fixed 5V output. When charging for digital equipment, make sure USB output voltage is 5V.3.Some customers report:“The module can not adjust the output voltag..

Specifications:Input voltage range:4~38VDC (Note: input voltage not exceeding 38V)Output voltage range:1.25-36VDC adjustableOutput current: 0-5AOutput power: 75Wvoltmeter range: 4 to 40V, error ±0.1VOperating frequency: 180KHzHigh efficiency up to 96%Built in thermal shutdown functionBuilt in curren..

1. This module uses imported high-performance chip, performance is better than the general module. 2. Enter any 0.9V ~ 5V DC voltage output 5V DC voltage can be stable, with a single AA battery can deliver up to 200 ~ 300MA current, two AA batteries can be 500 ~ 600MA of output current, for you..

Input voltage: 1V ~ 5VOutput voltage: 5VOutput current: 500mAPCB size: 17.55mm * 25.22mm * high 5.85mm (not including usb height)Block size: 17.55 * 32.53mm * High 8.3mm (including usb height)Product Features:1, the input 0.9V ~ 5V any DC voltage, can be stable output 5V DC voltage, with two AA batt..

Input voltage range : 3-35V DC Output voltage range : 3.5-35v DCEfficiency : 96.7%(max) Output current : 6A(max)Voltmeter range:4 to 40V,error +-0.1vL * W * H = 6.7 x 4.3 x1.2 cm(approx.) When adjust the blue potentiometer ,please use a multimeter to monitor the voltage Rotating ..

FeaturesInput voltage range:4 40VDCOutput voltage range:1.25-37VDC adjustableOutput current:2Avoltmeter range: 0 to 40V, error 0.1VInput reverse polarity protectionBuilt in output short protection functionBuilt in thermal shutdown functionL x W x H =6.1*3.4*12 cmWeight: 22gLED digital voltmeter tube..

MORE INFOModule Properties: non-isolated constant current and voltage moduleRectification: non-synchronous rectificationUART USB interfaceInput voltage: 5V-32VOutput voltage: 1.27V-30VOutput current: adjustable maximum 5AConversion efficiency: 95% (the highest)Switching frequency: 300KHzOutput rippl..

Input Voltage: DC 2V-24VOutput Voltage: DC 5V-28VPeak Current: 2A (1A is recommended for a long time)Max Conversion Efficiency: 93%Max Load Power: 7W..

Specifications:Input voltage: DC 7-32VOutput voltage: (1)  DC 0.8-28V continuously adjustable.Output Current: 8A (when power tube's temperature exceeds 65 degrees, please add cooling fan)Constant current range: 0.2-8A ( adjustable )Lowest pressure: 1VOutput Power: Maximum power is about 300WCon..

Product descriptionDescription:- Two large aluminum heat sinks ensures a better heat dissipation and more stable performance.- Five 330uf/50V high frequency low resistance capacitors in parallel special for switch-mode power supply lower output ripple.- 23mm large magnet and 1.0 copper wire provides..

Specifications:Module Properties: Step-up / Boost DC-DC ConverterInput Voltage: DC 10 ~ 60 VOutput Voltage: DC 12 ~ 80 V ( adjustable, O/p Voltage more than the I/p Voltage by 2V )Output Current:10A MaxInput Current: 15 A Max( Under normal circumstances please 12A Current )The minimum voltage differ..

Input DC 14~80V, output 12VMaximum output current: 0.75ADC-DC high voltage step-down conversion module, frequency 150KHZMaximum conversion efficiency: 85%.Quiescent working current: about 2.5mAWorking temperature: –40°C to +85°CSize: 59 x 30 x 16mmWeight: 19g with terminal; 15.5g without terminal..

Specifications:Input voltage: DC10V-60VInput current: 10 (MAX)Static operating current: 10mA (12V 20V the higher the output voltage static too much)Output voltage: 12-60V continuously adjustable (default output 19V shipment other voltage please pay attention to the dispensers)Output current: 10A or ..

Discription:1. Size: 38mm (length) * 22mm (W) * 14mm (height)2. Weight: 8g3. Operating voltage :3.3 - 5 .5 V4. Clock chip: high-precision clock chip DS32315. Clock Accuracy :0-40 ℃ range, the accuracy 2ppm, the error was about 1 minute6. Calendar alarm clock with two7. Programmable square-wave outpu..