Battery Capacity Tester for 18650 Lithium Discharge Test Discharge Meter XH-M240
100% Brand new and high quality.
Display Accuracy: 0.1
Measurement Accuracy: 1mAH
Power Supply: DC5-12V /18650 Battery
Standby Current: 5-7mA
Discharge Current: about 500mA
Load Power: 10W 8ohm
Installation Size: 72mm*53mm
Mounting Aperture: 3mm
Conversion: 1mm=0.039inch, 1inch=25.4mm
How to use :
1: Put in the power supply battery to test the battery, turn on the power switch and display 4.1u, that is, the voltage of the test battery is 4.1v
2: Set termination voltage:Press + or - to display the termination voltage, and press + or - to set the termination voltage.(default: 3V)
3: Press the start button to start discharging (discharge current is about 500mA). At this time, the LED displays to detect the remaining battery voltage of 4V
4: Press the battery voltage switch key to mAh , display the discharged 20mAh
5: Press the second button to display 77mWH discharge in mW
6: When the discharge is completed, the display has been discharged 1900mAH, the red indicator light above the reset key is flashing state
Package included: 1 x 18650 Battery Capacity Tester (Battery not included)
1.Please allow 1-3mm error due to manual measurement,Please make sure you do not mind before you bid.
2.The colors may be a little difference for the different monitors displays, please understand.
- Stock: 2 - 3 Days
- Model: 3350
- SKU: 42000-0-