Enhance your Arduino projects with our Blue OV7670 300KP VGA Camera Module. This module features high sensitivity for low-light applications, making it perfect for various embedded systems. It supports a standard SCCB interface compatible with I2C, and outputs in multiple formats including RGB, YUV, and YCbCr. Designed for flexibility, it supports VGA and CIF resolutions and offers advanced features like automatic black level calibration, noise reduction, and edge enhancement.

• High Sensitivity: Ideal for low-light applications
• Voltage: 2.5V to 3.0V IO voltage
• Interface: Standard SCCB, compatible with I2C
• Output Formats: RGB, YUV, YCbCr
• Resolution: Supports VGA, CIF, and more
• Advanced Features: Automatic black level calibration, noise reduction, edge enhancement

Package includes 1x Blue OV7670 300KP VGA Camera Module for Arduino DIY KIT.

• Brand: u-blox
• Model: NEO-6M
• Update Rate: 10Hz
• Built-In Antenna: 25 x 25 x 4mm ceramic patch antenna

The High Sensitivity 5-Array Channel Tracking Sensor Module is integrated with five high sensitivity tracking sensors, offering accurate tracking of complex black or white lines. This sensor module also features an integrated infrared barrier sensor with an adjustable escape distance through a slide rheostat, a specially designed touch detection sensor, and digital output signals (V) for convenient MCU connectivity.

Key Features:

• Integrated with five high sensitivity tracking sensors
• Accurate tracking of black and white lines
• Infrared barrier sensor with adjustable escape distance
• Special touch detection sensor
• Digital signal output for easy MCU connectivity
• LED indicators for sensor output states
• Supports 3.0-5.5V voltage range
• High sensitivity with a tracking range of 0.5mm to 40mm

• Compact and Lightweight Design for easy integration
• Supports Type-C to 2.54mm Pin Conversion for versatile connectivity
• Stable DC 5V Operation for reliable performance
• Wide Operating Temperature Range for durability

• Can detect multiple gases: CO, NO2, C2H5OH, H2, NH3, and CH4
• High sensitivity with ppm detection range
• Compact design for easy integration in various applications
• Low power consumption

• Brand new and high quality.
• L293D is a monolithic integrated, high voltage, high current, 4-channel driver.
• Can drive DC motors and power supplies of up to 36V with a maximum current of 600mA per channel.
• H-Bridge configuration allows voltage to be applied across a load in either direction, ideal for motors.

• Input Voltage Range: 3V to 35V DC
• Output Voltage Range: 3.5V to 35V DC
• High Efficiency: 96.7% (Maximum)
• Output Current: 6A Max

Our Metal Detector Kit is designed for high performance and security applications. Ideal for various uses including entertainment, security checks, and industrial applications. Easy to assemble and use.

• Operating Voltage: DC 3-5V
• Operating Current: 40mA
• Standby Current: 5mA
• Detection Distance: 60mm
• Alarm Mode: Sound/Light
• Difficulty: Easy
• PCB Size: 86*61mm

• High Power Output: Supports up to 1500W with a maximum current of 30A
• Wide Input Voltage Range: Accepts DC 10V - 60V input
• Adjustable Output Voltage: 12V - 90V continuously adjustable
• Constant Current Mode: Adjustable 0.8A - 20A

3D প্রিন্টার A4988 DRV8

The 3D Printer A4988 DRV8825 Stepper Motor Driver Control Panel Board Expansion Board is designed for seamless integration with 3D printers. This board supports both A4988 and DRV8825 stepper motor drivers, offering flexible and efficient motor control.

• Segmentation: 16 segment (A4988) or 32 segment (DRV8825) with jumper ON DP position
• Power Supply: Jv connection for 5V and 12V-24V power supply
• Drive Signal Output: Jc E, S, D, G for Enable/Step/Dir/Gnd

825 স্টেপার মোটর ড্রাইভার কন্ট্রোল প্যানেল বোর্ড সম্প্রসারণ বোর্ড

Our 4 Channel LED Panel Controller for P10/P6 offers advanced control and management of your LED display panels. This high-quality controller is designed to enhance the performance and longevity of your LED panels with its impressive features.

• Supports P10 and P6 panels
• Quad-channel control
• Easy installation and configuration
• High performance and reliability
• Ideal for advertising, information display, and more

The CP2102 USB to TTL UART Serial Converter is ideal for reliable and versatile communication between your USB and serial devices. Key features include:

• 3.3V and 5V dual power output.
• Self-recovery fuse for protection against short circuits.
• Compatible with 3.3V and 5V Arduino boards.
• Power, data reception, and data transmission indicator LEDs.
• 640 byte receive buffer and 512 byte transmit buffer.
• Supports baud rates from 300 bps to 1 Mbps.

• Motor Control Modes: Operates in CW, CCW, short-brake, and stop modes to control two DC motors.
• PWM Speed Control: Each motor’s speed is controlled via a PWM signal, up to a frequency of 100 kHz.
• Power Supply: VM up to 15V max for the motor, and VCC range of 2.7V-5.5V for logic supply.
• High Output Current: Rated output current of 1.2A (average), with a peak of 3.2A.

• Wide voltage input range from 6V to 35V
• Quick Charge 3.0 support for fast and efficient charging
• Built-in MOS tube for anti-reverse connection protection (better than traditional diodes, preventing overheating and damage)
• Blue LED output indicator and Red LED quick charge status indicator

801S Vibration Switch Detection Sensor Module 3Pin Vibration Sensor

• Full HD 1080P resolution with up to 120FPS for smooth video capture
• AI-powered visual recognition for advanced object detection and tracking
• Wide field of view (80°–120°) for enhanced coverage
• USB 2.0 plug-and-play compatibility for easy setup and fast data transfer