• Type: YL-99 Impact Switch Module
• Product Name: YL-99 Impact Switch Module sensor for r3
• Condition: YL-99 Impact Switch Module

• High-Precision Laser Sensor: Measures absolute distance up to 2 meters
• Compact Design: Small form factor for easy integration
• I2C Communication: Simplifies connection with microcontrollers
• Wide Voltage Compatibility: Works with 3V to 5V power supply

• Equipped with Renesas RA4M1 MCU, based on Cortex M4 architecture
• Supports HID device emulation, allowing it to function as a mouse or keyboard
• Enhanced power section, allowing input voltage up to 24V through VIN
• Includes a 12-bit DAC for precision analog output

• Dot Laser for precise applications
• Low Power Consumption at 5mW
• Compact Design with a 6mm OD for easy integration
• Stable Operation at a 650nm wavelength

• Supports single (4.2V) and double (8.4V) lithium rechargeable batteries
• Adjustable charge current: 0.1A to 2A
• Multiple safety protections: Overcurrent, undervoltage, overtemperature, and reverse battery shutdown
• Charge status indicator: Red and green LED lights

• Integrated buttons & LED circuits for easy prototyping
• Exposed power pins (5V, GND, and Raw) for convenient connections
• SOIC pad for IC placement
• Mini breadboard with 170 tie points, attached with self-adhesive backing

IR Transmitter Module:

• Supply Voltage: 5V
• Wavelength: 940nm

IR Receiver Module:

• High Sensitivity 1838 remote control receiver
• Working Voltage: 5V

• Model: HBV-1466FF
• Highest resolution: 2592 x 1944
• Field of view: 60°
• Chip: OV5640 (1/4")

• Oscillator for generating clock signals.
• Pattern Generator for creating specific output patterns.
• Manual Byte Generator for byte-level signal manipulation.
• Random Byte Generator for random data testing.

• Contactless Data Transmission: No battery required, energy is supplied by the reader.
• Anti-collision Technology: Multiple cards can be read at the same time without interference.
• Printable Surface: Can be customized for branding or identification purposes.

• LM358 Chip Onboard: Ensures reliable operational amplification.
• 100x Gain Circuit Design: Ideal for signal amplification applications.
• Adjustable Magnification: Features a 10K adjustable resistor for gain tuning.
• Power Indicator: Onboard LED for power status indication.

• WS2812 Chip: Integrated, addressable RGB LEDs.
• 5050 RGB LEDs: Full-color highlighting for vibrant lighting effects.
• 5V Operation: Works efficiently with a 5V power supply.

• High-resolution 500dpi scanner for accurate fingerprint recognition.
• Fast fingerprint image capture in less than 1 second.
• Low power consumption with a peak current of <60mA.
• USB/UART communication for easy integration.

Specifications:

• Operating Voltage: DC 5V - 36V
• Trigger Source: Digital high-low (DC 3.3V - 20V), supports microcontroller IO port, PLC interfaces, DC power, and PWM signal (frequency 0-20KHz)
• Output Capacity:
  • Voltage: DC 5V - 36V
  • Current: 15A continuous at room temperature, up to 30A with auxiliary cooling
  • Power: 400W
• Operating Temperature: -40°C to 85°C

Package:

1x 15 A 400 W high-power MOS FET trigger switch drive module PWM regulator control panel

• Low Power Consumption: Operates on a supply voltage of 2.4V-3.6V, typically 3.0V, and consumes only 0.12mA of current.
• Wide Measuring Range: Measures light intensity from 1lx to 65535lx.
• I2C Communication: Uses I2C bus for data transmission, making it easy to integrate with microcontrollers.
• High Accuracy: Offers ±20% accuracy in light measurements.

• Support 12 Mbps full speed USB transmission and 1.5 Mbps low speed transmission, compatible with USB V2.0.
• Serial communication baud rate can support 300000/115200/57600/38400.
• The same chip can be configured for upper computer mode and lower computer mode.
• The USB port of the upper computer conforms to the standard HID protocol and does not need to install additional drivers.