Description:1.If jumper is hit the position of ON DP, that means 16 segment (4988) or 32 segment (8825)Jm connected motor 2.Jv connect 5v and 12v-24v power supply 3.Jc E, S, D, G, respectively corresponding to the connection of the Enable/Step/Dir/Gnd drive signal output N..
Feature:1. Full support for MACH3 and other computer software that supports parallel port control.2, USB power supply and peripheral power supply are separated to ensure computer security.3, the peripheral wide voltage input, 12-24V, and anti-reverse function.4. All input signals are isolated by opt..
The WeMos D1 Mini TP5410 Lithium Battery Charging And Boost Shield
is designed to charge a Lithium battery connected to its XH2.54
connector. Please note that most hobby Lithium batteries ship with a JST-PH connector, which isn't the same as the one on this board!
The design also includes a M..
Product DescriptionUsing only two I2C pins, control 16 free-running PWM outputs! You can even stack up 62 shields to control up to 992 PWM outputs (which we would really like to see since it would be glorious and like 4 feet tall) Because I2C is a shared bus you can also connect other I2C devices an..
Brand new and high quality.Small soldering area.All For Ard uino pins are brought to the top level.1 reset button, 1 general use button, and 2 LED circuits can be used directly.5V, GND, and Raw pins are exposed as well.SOIC place for IC.The mini breadboard has 170 tie points.The breadboard sticks on..
is a programmer expansion shield that allows your for Arduino board to
modify the fuse bits and burn bootloader into external chip and other
for Arduino boards.
buzzer and LED indicators, indicating whether the burning is
successful, it is convenient for Arduino b..
Description:Made of high-quality material, durable, firm and has a long service life.With this Ethernet Shield, your board can be used to connect to internet.Comes with efficient library and examples. It can work as server or client.Direct plug puzzle board, NO soldering needed.Easy and simple to in..
Specification:Based on ESP-8266EXfor Arduino compatible, using for Arduino IDE to program11 x I / O pins1 x ADC pin (input range of 0-3.3V)Support OTA wireless uploadOnboard 5V 1A Switching Power Supply (highest input voltage 24V)After installing the hardware package, the direct use of for Arduino I..
For all version of for arduino Main board, 2009 , UNO, mega 1280, mega 2560.Direct plug puzzle board, NO soldering needed.Five momentary push buttons (4+ joystick select button, just like the for PlayStation 3 analog stick push button)two-axis thumb joystickspecification: The push buttons are connec..
Specification:Logic Control Voltage：5V (From Arduino)Motor Driven Voltage：6.5~12v(VIN Power Supply),4.8~35V (External Power Source)2 way motor driveLogic supply current Iss：≤36mAMotor Driven current Io：≤2AMaximum power consumption：25W（T=75℃）Up to 2A current each wayPin 4,5,6,7 are used to driv..
Product DescriptionFeatures:I2C interfacePower supply voltage: VM=15V maxOutput current: Iout=1.2A(average) / 3.2A (peak)Standby control to save powerCW/CCW/short brake/stop motor control modesPins Description:VM: Motor power supply + (Max 15Vdc)GND: Motor power supply -A1 A2: Motor AB1 B2: Mo..
Product Description:Name: nodemcu motor shieldUsing ESP-12 DEVELOPMENT KIT Development Shield ModuleExtend output ports for DEVKIT of ESP-12: SPI, UART, GPIO, AI and 3.3V power interfaceExtend 2-way motor, then directly drive 2-way motorDesign a power switchVoltage for motor: 4.5V-36VVoltage for ESP..