Sine Wave Inverter 5V DC-AC SPWM Driver Board EGS002 12MHz Crystal Oscillator EG8010 IR2113 Driving Module

Hot 2 - 3 Days

Description
Reviews

Introduction:

EG8010 is digital, the function very well brings its own time control from the pure sine wave inverter generator chip, used in two-stage DC-DC-AC power conversion structure or single-stage DC-AC transformer frequency boost architecture, external 12MHz crystal oscillator, to achieve high accuracy, and harmonic distortion is very small, 50Hz or 60Hz pure sine wave ASIC inverter. The chip uses CMOS technology, internal integration of SPWM sine generator, timing control circuit, multiplier ratio range, soft start circuit, protection circuit, RS232 serial communication interface and LCD 1602 serial driver module functions.

Features:

5V Single power supply

4 pin pure sine wave set Output frequency:

50 Hz pure sine wave fixed frequency 60 Hz pure sine wave fixed frequency 0-100 Hz

Pure sine wave Adjustable frequency 0-400 Hz Pure sine wave Adjustable frequency

Unipolar and bipolar modulation

Supplied with deadband control, pin 4 dead time:

300nS dead time 500nS dead time 1.0uS dead time 1.5uS dead time

External 12 MHz crystal oscillator

PWM carrier frequency 23.4 kHz

Voltage, current, real-time temperature feedback Overvoltage

, low voltage, overcurrent and overheat protection

Soft mode start-up allows you to set the response time 1S

Serial communication to set the output voltage, frequency and other parameters

External serial lcd module 1602 displays inverter

Voltage, Frequency, Temperature and Current Information

Applications:

Single Phase Unmodulated Sine Wave

Inverter PV Inverter

Wind Inverting Power Amplifier

UPS System Uninterruptible Power Supply

System Digital Generator

If Fuel Supply

Single Phase Motor Speed Controller

Single Phase Converter

Sine Wave Dimmer

Sine Wave Regulator Sine Wave

Generator