DC5V-12V to 12V Charging Module for 18650 Lithium Battery UPS Voltage Converter Module UPS uninterruptible power supply control

1.Description:

    It is a UPS uninterruptible power supply control board.

2.Features:

    1>.Support charging and discharging at the same time

    2>.Large current

    3>.Small size

    4>.High efficiency

    5>.Support short circuit protection

3.Parameters:

    1>.Product Name:UPS Voltage Converter Module 

    2>.Working Voltage:DC 5.0V-12.0V

    3>.Output Voltage:DC 12.0V

    4>.Output Power:12W

    5>.Support Battery(No include!):3.7V Lithium or polymer battery 15Ah(Max)

    6>.Working Temperature range:-40℃~85℃

    7>.Working Humidity range:0%-95%RH

    8>.Size:50*20*6.3mm

4.Using Steps:

    1>.Connect right input voltage at input terminal.

    2>.Check output voltage by voltmeter and ammeter.

    3>.Connect battery at B+ and B-.

5.Note:

    1>.Its max output current is 1A and can not keep output 1A.

    2>.The positive and negative poles of the input power supply cannot be reversed Otherwise the module will be damaged.

    3>.Users can install a common anode Red-Blue LED by yourself as charging indicators.Blue light indicates whether there is a load at output.Keep Red is charging.There is no battery if Red flashing.Red OFF if charged.

    4>.Due to the large current, it is recommended to use a thicker wire.Wire cross-section greater than 1.5 square millimeters.

    5>.Please read use manual and description before use.

6.Application:

    1>.Ordinary power supply;

    2>.Battery charger;

    3>.Mobile power;

    4>.Power conversion;

    5>.Infrared alarm;

    6>.Network equipment such as switches;

    7>.Router;

    8>.Battery car modification