CD4046B CMOS Micropower Phase-Locked Loop (PLL) consists of a low-power, linear voltage-controlled oscillator (VCO) and two different phase comparators having a common signal-input amplifier and a common comparator input. A 5.2-V zener diode is provided for supply regulation if necessary.The CD4046B..
The HA17741/PS is an internal phase compensation high-performance operational amplifier, that is appropriate for use in a wide range of applications in the test and control fields.High voltage gain : 106 dB (Typ)Power Dissipation:100mW(Maximum),65mW(Typical)Power Supply Voltage:+18VInput Voltag..
ICL-7660 CMOS Voltage Converter.DescriptionSimple Conversion of +5V to ±5V SuppliesSimple Voltage MultiplicationTypical Open Circuit Conversion Efficiency 99.9%Wide Supply Range 1.5V to 10VMinimal External Components Required..
Description: The LM358 is a great, easy-to-use dual-channel opamp. Opamps have so many applications we figured we should probably carry at least one in a DIP package. LM358 applications include transducer amplifiers, DC gain blocks and all the conventional opamp circuits.If you’re loo..
The PLL IC 556 is usable over the frequency range 0.1 Hz to 500 kHz. It has highly stable centre frequency and is able to achieve a very linear FM detection. The output of VCO is capable of producing TTL compatible square wave. The dual supply is in the range of ±6V to ±12V. The IC can also be opera..
The TL071 JFET-input Operational Amplifier incorporates well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit. The low harmonic distortion and low noise make the TL071 ideally suited for high-fidelity and audio pre-amplifier applications. ..
DESCRIPTIONThe TL072, TL072A, and TL072B are high speed JFET input dual operational amplifiers incorporating well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit. The devices feature high slew rates, low input bias and offset current, and low offset voltage temp..
The TL08x JFET-input operational amplifier family is designed to offer a wider selection than any previously developed operational amplifier family. Each of these JFET-input operational amplifiers incorporates well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit..
TLC-274 Quad Single Supply Op-Amp.Description: Single Supply OperationWide Range of Supply VoltagesOutput Voltage Range includes Negative RailHigh Input ImpedanceBuilt-In ESD ProtectionDesigned-In Latch-Up ImmunityTLC274CN Datasheet..