STX882 ASK Wireless Remote Control Transmitter ModuleSTX882 is a ASK transmitter module with small size, ultra high power, low harmonics. With high stability, it can be achieved at 50mW power when the voltage is 3.6V, it is the maximum transmitter power module under the the same voltage in the marke..
Atmel's Low-voltage, high-performance CMOS 8-bit microcomputer with 2KB of flash programmable and erasable read-only memory. The device is manufactured using high-density nonvolatile memory technology and is compatible with the industry-standard MCS-51 instruction set. This versatile 8-bit CPU with ..
AT89S51 is a low-power, high-performance CMOS 8-bit microcontroller that belongs to Atmel's 8051 family.AT89S51 has 4KB of Flash programmable and erasable read only memory (PEROM) and 128 bytes of RAM. It can be erased and program to a maximum of 1000 times.It's Compatible w..
The AT89S52 is a low-power, high-performance CMOS 8-bit
microcontroller with 8K bytes of in-system programmable Flash memory.
The AT89S52 provides the following standard features: 8K bytes of Flash,
256 bytes of RAM, 32 I/O lines, Watchdog timer, two data pointers,
three 16-bit timer/counter..
The high-performance, low-power Microchip
8-bit AVR RISC-based microcontroller combines 128KB flash memory with
read-while-write capabilities, 4KB EEPROM, 4KB SRAM, 53 general purpose
I/O lines, 32 general purpose working registers, real time counter, four
flexible timer/counters with compar..
The low power, high performance CMOS
8/16-bit microcontroller is based on the Microchip AVR enhanced RISC
architecture. The device features 16KB self-programming flash program
memory, 1024-byte SRAM, 512-byte EEPROM, 8 channel 10-bit A/D converter
and JTAG interface for on-chip-debug. The de..
The ATmega328P is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmegaPA/328P achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus proces..