Menu
Your Cart

Analog

Analog

Model: 2128-60000
Features:Fixed 6V voltage regulatorsThermal overload protectionShort circuit protectionOutput transition SOA protectionHeatsink is required * Specifications:Output Type: FixedOutput Voltage: +6V dCCurrent Output: up to 1.5AInput Voltage: 8.3 - 35VDC​Quiescent (standby) current: ..
৳15.00
Ex Tax:৳15.00
Model: 0715-50000
Features:5V Positive Voltage RegulatorOutput Current upto 100mAMaximum Input Voltage is 30VOperating current(IQ) is 5mAInternal Thermal Overload and Short circuit current limiting protection is available.Applications:Constant +5V output regulator to power small loads of less than 100mAAdjustable Out..
৳5.00
Ex Tax:৳5.00
Model: 2384-30000
Description: The 78L09 TO-92 Positive Voltage Regulators,This series of fixed-voltage integrated-circuit voltage regulators is designed for a wide range of applications. These applications include on-card regulation for elimination of noise and distribution problems associated with ..
৳5.00
Ex Tax:৳5.00
Model: 0639-12000
Product Description Part NO.:ADC0804LCNPackage:20-DIPDescription:IC ADC 8BIT MPU COMPAT 20-DIPSupplier:SICSTOCKNumber of Bits:8Sampling Rate (Per Second):10kData Interface:ParallelNumber of Converters:1Power Dissipation (Max):875mWVoltage Supply Source:Single ..
৳166.17
Ex Tax:৳166.17
Model: 0666-15000
The CD4013B device consists of two identical, independent data-type flip-flops. Each flip-flop has independent data, set, reset, and clock inputs and Q and Q outputs. These devices can be used for shift register applications, and, by connecting Q output to the data input, for counter and toggle appl..
৳15.00
Ex Tax:৳15.00
Model: 0670-20000
Quad Bilateral Switch for MultiplexingOperating Voltage: 3V to 18VSwitching Voltage: 20V (maximum)On-state Resistance: 200Ω (at 15V Vcc and 10kΩ Load)Output current High: -0.4mALow Level Control pin Voltage: 0.9V (max)High Level Control pin Voltage: 11V (min @ 15V Vcc)Available in 14-pin PDIP, GDIP,..
৳15.00
Ex Tax:৳15.00
Model: 0971-12000
The IC CD4017 is used for counting applications, it has the capability to turn on 10 outputs sequentially in a pre-defined time and reset the count or hold it when required. It also has the capability to indicate the status of counting using Carry pin. This is commonly used for Led chasers..
৳24.15
Ex Tax:৳24.15
Model: 0673-15000
CD4027 - Dual J-K Master/Slave Flip-Flop with Set and ResetThe CD4027BC dual J-K flip-flops are monolithic complementary MOS (CMOS) integrated circuits constructed with N- and P-channel enhancement mode transistors. Each flip-flop has independent J, K, set, reset, and clock inputs&nbs..
৳26.25
Ex Tax:৳26.25
Model: 2379-18000
CD4046B CMOS Micropower Phase-Locked Loop (PLL) consists of a low-power, linear voltage-controlled oscillator (VCO) and two different phase comparators having a common signal-input amplifier and a common comparator input. A 5.2-V zener diode is provided for supply regulation if necessary.The CD4046B..
৳26.25
Ex Tax:৳26.25
Model: 1066-20000
We can use the IC in both Astable and Monostable mode, for making different circuit. The IC can be used for generating clock pulse, sine wave, square wave and many others. It can also be used in application of timing delay circuits, frequency multiplier and frequency divider. To generate an envelope..
৳20.00
Ex Tax:৳20.00
Model: 2380-15000
The CD4066B device is a quad bilateral switch intended for the transmission ormultiplexing of analog or digital signals. It is pin-for-pin compatible with the CD4016B device,but exhibits a much lower on-state resistance. In addition, the on-state resistance is relativelyconstant over the full signal..
৳24.15
Ex Tax:৳24.15
Model: 2593-00000
Features:Output Voltage: 8VMaximum Input Voltage: 35VMaximum Output Current: 1ADropout Voltage: 2V..
৳15.00
Ex Tax:৳15.00
Showing 1 to 12 of 16 (2 Pages)