Your Cart

Digital Amplifier Board OEP30W Mono

Digital Amplifier Board OEP30W Mono
Digital Amplifier Board OEP30W Mono
Digital Amplifier Board OEP30W Mono
Digital Amplifier Board OEP30W Mono

Product description

OEP30W Audio Module Class D Digital Power Amplifier Board Replace TDA8932 DIY 30W

Output short circuit protection
Mini small size, easy to install
Can be differential input (need to cut off the circuit designated parts)

Model:OEP30W amplifier module
Working style:Class D(PWM modulation)
Chip election:OEP30Wx2
Channel number:Single channel
Power supply range: DC:7.5V-24V
Amplifier gain:36dB(Can be set 26dB)
Input impedance:1KΩ
Output impedance:8-3.2Ω
Output power:
30W THD+N=10%(4Ω,16V)
17W THD+N=10%(4Ω,12V)
15W THD+N=10%(8Ω,16V)
9W THD+N=10%(4Ω,12V)
25W THD+N=1%(4Ω,16V)
12W THD+N=1%(8Ω,16V)
Quietscent current:11mA(12V power supply)
Resting current:<0.3mA(12V power supply)
Recommended speaker:30-100W
Signal to noise ratio:102dB
Harmonic distortion:<0.1%
Frequency range:20Hz--20kHz
Working temperature:-40~85℃
Cooling volume:Without cooling
Apperance size:18*18*2.5mm L*W*H
Net Weight:2g
Remarks:4Ω speakers do not recommend more than 16V power supply
Protection Function:Output short circuit protection(Troubleshooting immediate recovery)

1. power amplifier board power, the hand can not touch the board components on the pin, because the human interference signal interference digital amplifier timing, resulting in damage to the chip, as well as the human body with a strong case of static breakdown of components, the human body static The basic knowledge of harm we still want to popularize the next.
2. the power supply voltage to be stable, as far as possible the use of switching power supply and battery power, if the power ripple is too serious, you can add capacitance filter. Battery-powered without additional capacitor filtering. Power supply must not exceed the board operating voltage, or burn the chip, digital ampli

Write a review

Note: HTML is not translated!
Bad Good