Introduction: The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 micro stepping bipolar stepper motor driver. The
module has a pinout and interface that are nearly identical to those of
our A4988 stepper motor driver carriers, so it can be used as a
Feature:1. Full support for MACH3 and other computer software that supports parallel port control.2, USB power supply and peripheral power supply are separated to ensure computer security.3, the peripheral wide voltage input, 12-24V, and anti-reverse function.4. All input signals are isolated by opt..
Description :1. A4988 driver board is widely used in 3D printers and small CNC machine tools2. Simple step and direction control interface3. Thermal protection, overcurrent protection, ground fault protection4. Five different step resolutions: full step, half step, quarter step, step 8 and step 165...
The WeMos D1 Mini TP5410 Lithium Battery Charging And Boost Shield
is designed to charge a Lithium battery connected to its XH2.54
connector. Please note that most hobby Lithium batteries ship with a JST-PH connector, which isn't the same as the one on this board!
The design also includes a M..
is a programmer expansion shield that allows your for Arduino board to
modify the fuse bits and burn bootloader into external chip and other
for Arduino boards.
buzzer and LED indicators, indicating whether the burning is
successful, it is convenient for Arduino b..
This is a very simple breadboard power supply board that takes power
from a DC wall wart or an USB port and provides dual output voltages
(5.0V and 3.3V).Apply to MB102 breadboard.The output voltage for each breadboard rail can be selected through a 2-pin shunt jumper.Fluctuation two road indepe..
Each road stepper motors only need two IO portsThis expansion board as a driver expansion board, can be used for engraving machines, 3D printers.It is a total of four slots, can drive four A4988 stepper motor.Stepper motor wiring as follows: 2A, 2B is a group (red, green), 1A, 1B is a group (blue, y..
Product Description:This karaoke board uses a PT2399 reverb chip, which can be mixed with vocals and music with the NE5532 op amp. The volume of the music, the volume of the microphone, and the reverberation time can be independently adjusted to achieve the karaoke effect. This product uses DC1..
Universal SOIC,SOP8(EZ) SO8 TO Dip 8 Adapter 150mil IC. programmer(1.27 Pitch) and all SOP8 narrow chips. Suitable for ALL-11 Series,ALL-100GANG , LT-48 Series, SuperPRO Series, TOP Series etc. Support Chips: 24CXX, 93CXX and all SOP8 narrow chips.&..
The MPU-6050 is a serious little piece of motion processing tech! By combining a MEMS 3-axis gyroscope and a 3-axis accelerometer on the same silicon die together with an onboard Digital Motion Processor™ (DMP™) capable of processing complex 9-axis MotionFusion algorithms, the MPU-6050 does away wit..